DocsEdit and deliver
Video
Trim, adjust, rough cuts, proxies, multicam and sending to your editor.
On this page
Trim
Trim shows a clip’s frames and a waveform with silences hatched. Zoom from Fit to 64×, split at the playhead (S), mark in and out (I, O), keep or cut a segment (X), and delete it (⌫). Find dead space marks quiet stretches. Render the edit, or export it as FCPXML or EDL.
When the album belongs to a shoot with a shot list, each segment in Trim’s list has a shot picker under it. Choose the shot the segment is of, or No shot. A shot the AI chose when it found the segments is marked Suggested. Keeping a tagged segment ticks its shot, and cutting it opens the shot again; the status line and the inspector’s Shot list section show the count and what is still to get. In a hand-off, a kept segment tagged with a shot is named after the shot on the timeline (in an EDL, the shot is a comment under the event, and the event keeps the file’s name so the editor can find the footage).
Adjust
Trim’s inspector has an Adjust panel for the open clip: Exposure, Contrast, Saturation, Temperature, Tint, a Look and Volume. The player shows each change as you make it. Nothing is written to the clip: the adjustments are kept in Stow, per clip, and follow the clip when Stow moves or renames it. Undo (⌘Z) takes back the last change, Reset takes them all off, and Before shows the clip without them until you click it again or move a slider.
- A Look is a LUT from Settings › Video › LUTs, applied after the sliders. Removing that LUT from the library takes the look off the clips that had it.
- The sliders expect normal-looking footage. For log footage (F-Log, S-Log3, D-Log and the like), set the camera’s LUT on the shoot first; the sliders then work on the picture after that LUT. The panel says so when a camera is set to a log profile and has no LUT.
- Volume is in dB, from −30 to +12. The player can’t play a clip louder than it was recorded, so you hear a boost in exports and in your editor, not in Trim.
Stow combines the camera’s LUT, the sliders and the look into one colour table. The player shows the clip through it and Export edit renders through the same one, so the file matches what you saw. An adjusted clip is shown through its adjustments wherever it plays, whatever Preview LUT says. Thumbnails and Trim’s frame strip stay as they were.
Where the adjustments go.
- Export edit renders the kept segments through the camera’s LUT and your adjustments, at the volume you set. A clip with a camera LUT and no adjustments is rendered through the LUT too.
- Proxies don’t change. A proxy is made once, with the camera’s LUT burned in if you chose that, and Trim lays your adjustments over it as it plays.
- A hand-off to Premiere Pro, Resolve or Final Cut Pro puts a .cube file for each adjusted clip in the LUTs folder, named after the clip, with a note on the clip saying where it is. It holds the camera’s LUT, your adjustments and the look, so apply it to that clip in place of the camera’s LUT. Editors don’t reliably read colour from a timeline file, which is why it’s a LUT. Volume is on the timeline itself, on the clip’s camera sound.
Rough cut
Rough cut is an album mode beside Grid, Cull, Trim and Edit (⌘5). It cuts the album’s clips together on one timeline, with sound, and saves the result in Stow under a name. An album can have several: the menu with the rough cut’s name lists them, and makes, renames, duplicates and deletes them. Nothing is written to your clips.
Start one.
- From keeps, in capture order: every segment you kept in Trim, clip by clip in the order they were shot. If no clip is trimmed, every clip whole.
- From a multicam group: one camera’s clips of a group, in time order. The other cameras’ clips are in the strip below to cut in.
- Empty rough cut: then click clips in the strip under the timeline. A clip is added after the selected clip, or at the end.
The timeline. There is one video track, V1, with each clip’s own sound drawn under its frames, and two sound tracks, A1 and A2. Clips on V1 always butt together: there are no gaps.
- Drag a clip to reorder it. The others close up as it passes.
- Click a clip, then drag either end to trim it. The player shows the frame at the end you’re moving.
- S splits the clip under the playhead. ⌫ deletes the selected clip or sound item, and what follows moves up.
- Space plays, J, K and L shuttle, ← and → step a frame, ⇧← and ⇧→ a second. ⌘= and ⌘- zoom, ⇧Z fits.
- ⌘Z undoes each change, and ⇧⌘Z redoes it.
Sound.
- Add synced recorder audio (the + menu) puts each clip’s paired recording under it on A1 and turns the camera’s sound off there. The recording is linked to its clip: it follows the clip when you move, trim or split it, and stays in sync, because Stow places it from the pairing each time. Pair the audio first; see External audio.
- Add music or an audio file places a whole sound file at the playhead on A2. Drag it along its track or to the other one, and drag its ends to trim it. Stow links the file where it is; it isn’t copied.
- Select a clip or a sound item to set its volume in the inspector, or turn it off. A clip’s volume here is on top of its volume in Trim’s Adjust panel.
The player. It plays across the cuts, each clip through its camera’s LUT and its adjustments, as Trim shows it. A clip that is heavy to decode plays its proxy if it has one, and says Playing proxy. A clip this Mac can’t play is stepped over in time, and is still in the project and the render. Cuts in the player can be about a frame off: it swaps clips by its own clock. The project and the render are counted in whole frames and are exact.
Mixed frame rates. A rough cut runs at its first clip’s frame rate. Clips at another rate play for their real length, and your editor or the render conforms them; the inspector names them. It also names clips with a variable frame rate, as phones record, whose cuts may land a frame or so off.
Export. Export opens a sheet with two ways out. Both read the original files, never the proxies.
- Export project writes a project for Final Cut Pro (FCPXML) or for Premiere Pro or DaVinci Resolve (Final Cut Pro 7 XML) into the album’s Edits/Stow hand-off folder, named after the rough cut, then opens the editor if it’s installed. The project holds the cuts in order, the clips’ names and source timecode, each cut’s camera sound at its volume, and the sound tracks with their sync and volume. A sound item that is turned off arrives disabled. The LUTs folder beside it holds each camera’s LUT and a .cube for each clip you adjusted, as in Adjust. In Premiere choose File › Import, and in Resolve File › Import › Timeline; Final Cut imports the file when it opens.
- Render one file makes an H.264 MP4 to send or a ProRes 422 MOV to carry on from, in the album’s Edits folder, at the first clip’s size and frame rate, with each clip’s LUT, adjustments and volume applied. Music that runs past the last clip ends with the picture. A rough cut of more than 120 cuts and sound items is too many to render in one go: export the project instead.
Rough cuts follow their files when Stow moves or renames them. A clip or sound file that isn’t on its drive is named above the player, and has to be connected before you export or render.
Timecode
Stow reads a clip’s timecode from the file, a Sony clip’s XML, or a Broadcast WAV’s header, and shows it in Trim and the inspector.
Proxies
Settings › Video can make a small proxy of each clip in the background after its import is checked, one at a time. Each goes in the album’s PROXY folder under the clip’s name. Originals are only read, never changed, and proxies don’t count as copies of a card. A shoot can choose its own setting.
Trim plays a clip’s proxy instead of the original when the original is heavy for this Mac to decode (10-bit or 4:2:2 footage, or HEVC above 4K30), where the picture could stall while the sound plays on. It says “Playing proxy”, and Play original switches back for that clip. Segments, Find dead space and Export edit always use the original. While a clip plays, the proxy queue waits and the timeline holds off cutting frames, so neither competes with the player for the drive.
If playback still stutters, turn on Show playback statistics in Trim (Settings › Advanced) and reopen the clip. Over the player it shows frames shown and dropped, how much is buffered and whether the LUT preview is drawing, which says whether the decoder, the drive or the LUT is behind it.
LUT preview
Give a camera its log profile and a .cube LUT on the shoot, and its clips are shown through it in posters, Trim and the player while Preview LUT is on. Stow doesn’t include makers’ LUTs: use the one your camera’s maker publishes. A LUT changes only how Stow shows a clip, never the file. Proxies can have the LUT burned in.
Stow keeps its own copy of every LUT a camera uses, so clips are still shown through it with the drive the LUT came from unplugged. Settings › Video › LUTs lists them, with how many cameras and shoots use each; you can add, rename or remove them there. Removing one leaves the cameras that used it shown as recorded, and never touches the file it came from. A LUT chosen before Stow kept copies is copied the next time its file can be reached. Clips are shown through their LUT wherever they play: Trim, Cull and the Lightbox.
Multicam
Clips from different cameras that overlap in time are grouped on the shoot, and can be exported as multicam or synced clips in FCPXML. Stow groups them by corrected time, so set each camera’s clock first if one ran fast or slow. See Camera clocks.
External audio
Pair audio matches each recording from an audio recorder to the clips it ran during: by timecode, then by each camera’s corrected clock, then by the sound itself. Multicam and synced exports include the recordings, lined up, and EDL exports name each clip’s recording and where it starts.
Add audio. On a shoot (Shoot › Audio › Add audio…) or an album (Trim › More), choose audio files, a folder, or an inserted recorder card. Files chosen together have to be in one folder. Stow copies and verifies the recordings into the album’s AUDIO folder like any import, with no recorder to set up first. When the import is done and the album has clips, Stow pairs them on its own and says how it went, for example “14 paired, 2 to check”. A shoot’s own imports pair the same way once the shoot has both clips and recordings.
Formats. WAV and Broadcast WAV, MP3, M4A, FLAC and AIFF all pair. Only Broadcast WAV carries timecode, so the others are placed by clock, then by sound. Add audio imports AAC, OGG and WMA files too, but Stow doesn’t pair them.
A recorder’s tracks stay together. A take recorded as several files (ZOOM0001_Tr1.WAV, _Tr2, _LR, _TrMic, _1-2, and the take’s own ZOOM0001.WAV) is one take: its files are imported together, and renaming keeps each track’s suffix.
Hear the sync. In Trim, a clip with a paired recording shows Camera and the recording’s name above the timeline. Choose the recording to play it in place of the camera’s sound, lined up with the picture.
Pairs marked “check it” were found by clock alone, or by a weak sound match: listen before relying on them. Pairing reads files and never changes one.
Send to Premiere Pro or Resolve
In Trim, choose More › Send to Premiere Pro or Resolve, or Send the album from Export edit. Pick Premiere Pro, DaVinci Resolve or Final Cut Pro. Premiere and Resolve get one timeline file with a bin for each camera and capture day, a sequence of the kept segments, and paired recorder audio on its own tracks. Final Cut gets the sequence. Each clip keeps its own timecode, so the editor finds the right frames.
- Leave in place writes the timeline and a copy of each camera’s LUT to the album’s Edits/Stow hand-off folder. The footage stays where it is.
- Copy to a folder makes checked copies of the footage, recorder audio, proxies and LUTs in a folder you choose, such as one on a travel drive: a folder per day, with each clip’s proxy in a Proxy folder beside it. The timeline points at the copies.
Stow then opens the editor if it’s installed and shows the folder. Three steps stay with you: import the timeline (File › Import in Premiere, File › Import › Timeline in Resolve), attach the proxies in Premiere, and apply each camera’s LUT. A clip you adjusted in Trim has a LUT of its own to apply instead; see Adjust. Stow remembers the editor and choice you used last.
ASC-MHL checksum lists
A shoot can write ASC-MHL checksum lists for each destination, with its offload report or on demand, for productions that ask for them.
Camera folder layouts
Cards from cinema cameras, action cameras and drones keep their own folder layouts. See Importing for what Stow recognises and keeps together.